NSN 2520-01-474-3901 · NIIN 014743901 · FSC 2520
NO DASHES 2520014743901
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Application: NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.450 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 29.770 AND INCHES MAXIMUM 30.240 |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 2.948 AND INCHES MAXIMUM 2.952 |
| AMDM | FIRST END SPLINE LENGTH | INCHES MINIMUM 3.210 AND INCHES MAXIMUM 3.250 |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 3.210 AND INCHES MAXIMUM 3.250 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 1.282 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 1.375 |
| AMGF | SECOND END PITCH DIAMETER | INCHES MINIMUM 0.071 AND INCHES MAXIMUM 0.073 |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | INCHES NOMINAL 1.375 |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 6 |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.355 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| FEAT | SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |