NSN 3020-00-200-2107 · NIIN 002002107 · FSC 3020
NO DASHES 3020002002107
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWSN | KEYWAY NOMINAL WIDTH | FIRST END INCHES 0.1584 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | FIRST END INCHES 0.5953 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.875 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.2812 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.875 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.2812 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.0625 |
| FEAT | SPECIAL FEATURES | TIMING MARK ON 1ST SIDE 170 DEG 26 MIN 51 SEC CCW FROM KEYWAY,TIMING MARK ON 2ND SIDE 116 DEG 34 MIN CCW FROM TIMING MARK ON 1ST SIDE,2 HOLES 5/32 IN. DIA,ONE LOCATED OVER KEYWAY,180 DEG APART |
| MATT | MATERIAL | OVERALL IRON |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 1.0003 |
| CWPZ | HELIX ANGLE | DEGREES 37.1734 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.156 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.313 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.063 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.0240 |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.216 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
Supersedes
This item replaces cancelled NIIN 003225306. An older drawing citing one of those numbers resolves here.