NSN 5315-01-095-5865 · NIIN 010955865 · FSC 5315
NO DASHES 5315010955865
In Stock
PIN,SHOULDER,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 2.033 AND INCHES MAXIMUM 2.093 |
| ABPR | FIRST STEP DIAMETER | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.640 |
| ABPS | FIRST STEP LENGTH | INCHES NOMINAL 0.126 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.312 |
| ABPU | SECOND STEP LENGTH | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.078 |
| ABPV | THIRD STEP DIAMETER | INCHES MINIMUM 0.372 AND INCHES MAXIMUM 0.373 |
| ABPW | THIRD STEP LENGTH | INCHES MINIMUM 1.844 AND INCHES MAXIMUM 1.905 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.062 AND INCHES MAXIMUM 0.078 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES MINIMUM 0.907 AND INCHES MAXIMUM 0.967 |
| AMCS | FIRST END TAPER LENGTH | INCHES MAXIMUM 0.047 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.985 AND INCHES MAXIMUM 1.015 |
| HGTH | HEIGHT | INCHES MINIMUM 0.172 AND INCHES MAXIMUM 0.202 |
| MATT | MATERIAL | OVERALL STEEL COMP 1018 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| SFTT | SURFACE TREATMENT | OVERALL CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320,CL 2 |
| STYL | STYLE DESIGNATOR |