NSN 4320-01-146-5920 · NIIN 011465920 · FSC 4320
NO DASHES 4320011465920
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLANGE |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.530 AND INCHES MAXIMUM 0.540 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 1.000 AND INCHES MINIMUM 0.999 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 4.187 |
| AJAB | DRIVE SHAFT TYPE | WOODRUFF KEYWAY |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.710 |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES MINIMUM 1.750 AND INCHES MAXIMUM 1.810 |
| FEAT | SPECIAL FEATURES | CONSISTS OF SCREW CAPS 7;GEROTOR SUB-ASSEMBLY 1;RING 1;STAR 1;DRIVE 1;SPACER 1;FLANGE MOUNTING 1;HOUSING 1;PLUG,HOUSING P/N 8985; 1;SEAL P/N 15007,1;WASHER P/N 6049,7;CAP END P/N 7461,1;SEAL P/N 9086-2,3;PLATE,SPACER P/N 7358-1,1;SHAFT,OUTPUT P/N 7360-1,1;WOODRUFF KEY P/N 14193-1,1;THRUST BEARING RACE P/N 7462,1;BEARING,THRUST NEEDLE,P/N 7537-1,1;SCREW CAP P/N 57777,4;SEAL,PRESSURE P/N 9057-1,1;SEAL P/N 9055-1,1;NAMEPLATE P/N 9029-1,1;RIVET P/N 14334-2,1;LOCTITE P/N 7538;PLUG,SHIPPING,2. |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Supersedes
This item replaces cancelled NIIN 012220772. An older drawing citing one of those numbers resolves here.