NSN 4320-01-161-5178 · NIIN 011615178 · FSC 4320
NO DASHES 4320011615178
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 1324.0 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.835 AND INCHES MAXIMUM 0.848 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.996 AND INCHES MAXIMUM 0.998 |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 6 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.530 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ABUJ | THREAD SIZE | 0.500-14 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 144.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 4.190 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | NPTF |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 1.500 |
| ASMM | CONNECTION QUANTITY | 2 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 1.000 |
| AXFM | DRIVE SHAFT GOVERNMENT STANDARD | SAE 6B |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 14.900 |
| AZFG | MOUNTING BOLT HOLE SPACING | 180.0 DEG APART |
| MATT | MATERIAL | HOUSING STEEL |
| SFTT | SURFACE TREATMENT | HOUSING PAINT |
| ZZZV | FSC APPLICATION DATA | CRANE |