NSN 5962-01-169-4245 · NIIN 011694245 · FSC 5962
NO DASHES 5962011694245
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 3.168 AND INCHES MAXIMUM 3.232 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.880 AND INCHES MAXIMUM 0.900 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.205 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | MONOLITHIC AND HERMETICALLY SEALED AND PARALLEL OPERATION |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 28 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | MICROPROCESSOR 1 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS NOMINAL POWER SOURCE 5.5 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 200.00 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 18876-13100407 |
| TTQY | TERMINAL TYPE AND QUANTITY | PRINTED CIRCUIT 64 |
Supersedes
This item replaces cancelled NIINs 011866583 · 011663013 · 012092146. An older drawing citing one of those numbers resolves here.