NSN 3110-01-191-7541 · NIIN 011917541 · FSC 3110
NO DASHES 3110011917541
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.6050 AND INCHES MAXIMUM 0.6250 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 4.4997 AND INCHES MAXIMUM 4.5000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 5.1246 AND INCHES MAXIMUM 5.1250 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 20.0 AND POUNDS MAXIMUM 30.0 |
| CTHY | CONTACT ANGLE | DEGREES MINIMUM 15.0 AND DEGREES MAXIMUM 25.0 |
| FEAT | SPECIAL FEATURES | VACUUM IMPREGNATED RETAINER WITH SPECIFIED OIL,CENTRIFUGE FOR 2 MINUTES AT 100 G AFTER VACUUM; INSCRIBE MATCH MARK ON OD OF EACH BEARING; 1 SHIELD EACH BEARING |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-6085 |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | RETAINER COTTON AND PLASTIC PHENOLIC |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | SHIELD STEEL CORROSION RESISTING |
| MATT | MATERIAL | LUBRICATION OIL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MIL SPEC SINGLE MATERIAL RESPONSE -IL--79,TYE FBE |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 82577-801860 |
Supersedes
This item replaces cancelled NIIN 011269153. An older drawing citing one of those numbers resolves here.