NSN 3120-01-127-3835 · NIIN 011273835 · FSC 3120
NO DASHES 3120011273835
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.3125 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.6260 AND INCHES MAXIMUM 0.6270 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.5005 AND INCHES MAXIMUM 0.5015 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.9800 AND INCHES MAXIMUM 1.0000 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.6200 AND INCHES MAXIMUM 0.6250 |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | PLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | OUTER LAYER ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER LAYER MFR REF SINGLE MATERIAL RESPONSE LB0140-003,FSC- 43999 |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 43999-LD131-0027 |
Supersedes
This item replaces cancelled NIIN 003452167. An older drawing citing one of those numbers resolves here.