NSN 3120-01-163-9364 · NIIN 011639364 · FSC 3120
NO DASHES 3120011639364
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | FIRST INCHES NOMINAL 0.0600 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.7960 AND INCHES MAXIMUM 0.8070 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 1.5015 AND INCHES MAXIMUM 1.5025 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 1.3600 AND INCHES MAXIMUM 1.3650 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 1.7500 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0600 |
| AGKH | LUBRICANT ACCOMMODATION STYLE | |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER CHAMFERED |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER CHAMFERED |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | HOLE 4 |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | EXTERNAL 1 AND INTERNAL 1 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4640 |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF BODY CADMIUM |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF FLANGE CADMIUM |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF LEFT FLANGE CADMIUM |
| SFTT | SURFACE TREATMENT | INSIDE DIAMETER SURFACE OF BODY CADMIUM |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF BODY CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF BODY MFR REF SINGLE TREATMENT RESPONSE S13101,TY 2,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF BODY MFR REF SINGLE TREATMENT RESPONSE S13101,TY 2,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF FLANGE MFR REF SINGLE TREATMENT RESPONSE S13101,TY 2,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF LEFT FLANGE MFR REF SINGLE TREATMENT RESPONSE S13101,TY 2,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INSIDE DIAMETER SURFACE OF BODY MFR REF SINGLE TREATMENT RESPONSE S13101,TY 2,CL 2 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 76301-S21202,CLASS C |