NSN 5310-01-185-8497 · NIIN 011858497 · FSC 5310
NO DASHES 5310011858497
In Stock
NUT STRIP
Nuts and Washers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.037 AND INCHES MAXIMUM 0.043 |
| ACSZ | MATING MEMBER DIAMETER ACCOMMODATED | INCHES MINIMUM 1.658 AND INCHES MAXIMUM 1.673 |
| ACVN | NUT LENGTH | INCHES MINIMUM 1.876 AND INCHES MAXIMUM 1.906 |
| ADED | NUT WIDTH | INCHES MINIMUM 1.876 AND INCHES MAXIMUM 1.906 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| CJLK | APERTURE QUANTITY | 4 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| FEAT | SPECIAL FEATURES | ONE CENTRALLY LOCATED RD HOLE 1.658 IN. MIN DIA AND 1.673 IN. MAX DIA; FOUR CLINCH NUTS MOUNTED ON 1.497 IN. MIN X 1.503 IN. MAX MOUNTING CENTERS; NUTS EXTEND FOR A TOTAL THK OF 0.123 IN. MIN,0.183 IN. MAX; FOUR CORNERS 0.090 IN. NOM RADIUS; CLINCH NUTS ARE SELFLOCKING TYPE |
| MATT | MATERIAL | OVERALL EXCEPT INSERT ALUMINUM ALLOY 6061 |
| MATT | MATERIAL | NUT STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL EXCEPT INSERT FED SPEC 1ST MATERIAL RESPONSE QQ-A-250 TO 11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT MIL SPEC 2ND MATERIAL RESPONSE -IL-N-45938 |
| SFTT | SURFACE TREATMENT | OVERALL EXCEPT INSERT CHROMATE |
| SFTT | SURFACE TREATMENT | NUT CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL EXCEPT INSERT MIL SPEC 1ST TREATMENT RESPONSE -IL-C-5541 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT MIL SPEC 2ND TREATMENT RESPONSE -IL-N-45938 |