NSN 5320-01-163-0179 · NIIN 011630179 · FSC 5320
NO DASHES 5320011630179
In Stock
RIVET,BLIND
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.193 |
| AASK | HEAD STYLE | |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.110 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.349 AND INCHES MAXIMUM 0.357 |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.080 AND INCHES MAXIMUM 0.125 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 635 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
| MATT | MATERIAL | STEM STEEL COMP 8740 |
| MATT | MATERIAL | SLEEVE ALUMINUM ALLOY 5056 |
| MATT | MATERIAL | LOCKING RING IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCKING RING ASSN STD SINGLE MATERIAL RESPONSE A-S5731 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SLEEVE FED SPEC SINGLE MATERIAL RESPONSE QQ-A-430 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | STEM ASSN STD SINGLE MATERIAL RESPONSE A-S6322 |
| SFTT | SURFACE TREATMENT | SLEEVE CHROMATE |
| SFTT | SURFACE TREATMENT | STEM CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SLEEVE MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | STEM FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
Supersedes
This item replaces cancelled NIINs 014214513 · 011304303. An older drawing citing one of those numbers resolves here.