NSN 5305-01-501-8756 · NIIN 015018756 · FSC 5305
NO DASHES 5305015018756
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18E/F FORWARD FUSELAGE
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.335 AND INCHES MAXIMUM 0.355 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.455 AND INCHES MAXIMUM 1.485 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.265 AND INCHES MAXIMUM 0.272 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.1105 AND INCHES MAXIMUM 0.1125 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.1540 AND INCHES MAXIMUM 0.1560 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F/A-18E/F FORWARD FUSELAGE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.115 AND INCHES MAXIMUM 1.135 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 2200 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |