NSN 5306-00-825-3815 · NIIN 008253815 · FSC 5306
NO DASHES 5306008253815
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| ASXK | HOLE QUANTITY | 4 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.078 AND INCHES MAXIMUM 0.140 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.520 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.226 |
| BQDM | HOLE TYPE | DRILLED |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.0395 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | HEAD MICROINCHES 100.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 100.0 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.134 AND INCHES MAXIMUM 0.138 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.350 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MATT | MATERIAL | OVERALL STEEL COMP 4037 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| CRHC | HOLE CONFIGURATION STYLE |
Supersedes
This item replaces cancelled NIINs 001439799 · 001947830 · 010246189 · 010210848. An older drawing citing one of those numbers resolves here.