NSN 5305-00-818-1895 · NIIN 008181895 · FSC 5305
NO DASHES 5305008181895
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 80 |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.250 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.119 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 303 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7720 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-763 OR FED SPEC 3RD MATERIAL RESPONSE QQ-S-763 OR FED SPEC 4TH MATERIAL RESPONSE -IL-S-7720 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJD | THREAD CLASS | 2A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.250 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.060 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Supersedes
This item replaces cancelled NIIN 010323477. An older drawing citing one of those numbers resolves here.