NSN 5305-01-054-6634 · NIIN 010546634 · FSC 5305
NO DASHES 5305010546634
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Application: NOT KNOWN
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.487 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.047 AND INCHES MAXIMUM 1.067 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.399 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | NOT KNOWN |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.156 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | DOUBLE LEAD THD; AIRWORTHY CERTIFICATED ITEM SUPPLIED WITH CERTIFICATE OF CONFORMITY DOCUMENTATION |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNF |