NSN 5305-01-129-9061 · NIIN 011299061 · FSC 5305
NO DASHES 5305011299061
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.630 AND INCHES MAXIMUM 0.697 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.515 AND INCHES MAXIMUM 1.562 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.881 AND INCHES MAXIMUM 0.888 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.133 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | FURNISHED WITH ONE ORING |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |