NSN 5305-01-132-4365 · NIIN 011324365 · FSC 5305
NO DASHES 5305011324365
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.225 AND INCHES MAXIMUM 0.275 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.577 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.301 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 FSC- 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |