NSN 5305-01-140-3741 · NIIN 011403741 · FSC 5305
NO DASHES 5305011403741
In Stock
SETSCREW
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.250 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.625 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.096 AND INCHES MAXIMUM 0.110 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.243 AND INCHES MAXIMUM 0.251 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.375 |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.093 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5731 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35,TYE 1 |
| THSD | THREAD SERIES DESIGNATOR | UNJC |