NSN 5306-01-119-4265 · NIIN 011194265 · FSC 5306
NO DASHES 5306011194265
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.325 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.800 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 1.000 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.160 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.810 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.623 AND INCHES MAXIMUM 0.624 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES NOMINAL 2.400 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.562 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 205000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 43.0 AND ROCKWELL C MAXIMUM 45.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AATN |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| FEAT | SPECIAL FEATURES | TWO KEYWAYS 0.480 IN. NOM LENGTH BY 0.125 IN. MIN 0.130 IN. MAX WIDTH LOCATED IN THD END |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |