NSN 5306-01-131-2892 · NIIN 011312892 · FSC 5306
NO DASHES 5306011312892
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.335 AND INCHES MAXIMUM 0.361 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.346 AND INCHES MAXIMUM 3.376 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.171 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 2.990 AND INCHES MAXIMUM 3.010 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.222 AND INCHES MAXIMUM 3.272 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |