NSN 5360-01-108-0371 · NIIN 011080371 · FSC 5360
NO DASHES 5360011080371
In Stock
SPRING,HELICAL,COMPRESSION
Coil, Flat, Leaf, and Wire Springs
Application: USED ON F-18 LANDING GEAR
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.560 |
| ABQK | END STYLE | |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.740 |
| AGAV | END ITEM IDENTIFICATION | USED ON F-18 LANDING GEAR |
| AGEK | SPRING FREE LENGTH | INCHES NOMINAL 1.930 |
| AHQJ | ACCOMMODATED ROD DIAMETER | INCHES MAXIMUM 0.530 |
| AXJQ | SPRING SOLID LENGTH | INCHES MAXIMUM 0.800 |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND OR LEFT-HAND |
| AXLP | SPRING DEFLECTION RATE | POUNDS PER INCH NOMINAL 27.500 |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | INCHES NOMINAL 0.720 |
| CRTL | CRITICALITY CODE JUSTIFICATION | TEST AND SPCL |
| MATT | MATERIAL | OVERALL STEEL COMP 631 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5673 |
| SPCL | SPECIAL TEST FEATURES | FIRST ARTICLE TESTING |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 76301-74A450931-2001 |