NSN 5310-00-279-4284 · NIIN 002794284 · FSC 5310
NO DASHES 5310002794284
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CBBL | FEATURES PROVIDED | FLOATING NUT |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 0.254 |
| ACTA | NUT STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ACVN | NUT LENGTH | INCHES MAXIMUM 1.306 |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.600 |
| ADEB | PLATE THICKNESS | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.036 |
| ADEC | PLATE WIDTH | INCHES NOMINAL 0.574 |
| ADFK | NUT COUNTERBORE DEPTH | NUT INCHES MINIMUM 0.375 |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.314 |
| MATT | MATERIAL | CLIP STEEL CORROSION RESISTING |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATT | MATERIAL | NUT IRON ALLOY 660 |
| MATT | MATERIAL | SHELL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHELL ASSN STD SINGLE MATERIAL RESPONSE A-S 5525 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5732 |
| SFTT | SURFACE TREATMENT | SHELL PASSIVATE |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-442 |
Supersedes
This item replaces cancelled NIIN 012398676. An older drawing citing one of those numbers resolves here.