NSN 5310-00-764-7282 · NIIN 007647282 · FSC 5310
NO DASHES 5310007647282
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 0.194 |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| AZKQ | TEMP RATING | FAHRENHEIT MAXIMUM 450.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.686 AND INCHES MAXIMUM 0.690 |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.047 |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.308 AND INCHES MAXIMUM 0.328 |
| ADFK | NUT COUNTERBORE DEPTH | NUT INCHES MINIMUM 0.062 |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| ACTA | NUT STYLE | |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| ACVN | NUT LENGTH | INCHES MAXIMUM 0.948 |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MAXIMUM 49.0 |
| AAJD | THREAD CLASS | 3B |
Supersedes
This item replaces cancelled NIIN 006804273. An older drawing citing one of those numbers resolves here.