NSN 5310-00-819-2930 · NIIN 008192930 · FSC 5310
NO DASHES 5310008192930
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.047 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 105.0 AND DEGREES MAXIMUM 115.0 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.679 AND INCHES MAXIMUM 0.690 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.271 AND INCHES MAXIMUM 0.291 |
| ADFK | NUT COUNTERBORE DEPTH | NUT INCHES MINIMUM 0.037 AND INCHES MAXIMUM 0.047 |
| MATT | MATERIAL | OVERALL STEEL COMP 304 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5639 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 63.0 |
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 0.603 AND INCHES MAXIMUM 0.613 |
| ACTA | NUT STYLE | |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 2 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.438 |
| BZRR | THREAD SERIES | UNF |
Supersedes
This item replaces cancelled NIINs 005969022 · 010043248. An older drawing citing one of those numbers resolves here.