NSN 5315-00-702-9651 · NIIN 007029651 · FSC 5315
NO DASHES 5315007029651
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.072 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 1000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE AST- A493 OR ASSN STD 2ND MATERIAL RESPONSE AST- A582 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 16.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 410 OR STEEL COMP 416 |
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ACHT | PIN OVERALL LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.0939 AND INCHES MAXIMUM 0.0941 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 4.0 AND DEGREES MAXIMUM 16.0 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 42.0 |
Supersedes
This item replaces cancelled NIINs 011094172 · 012070742. An older drawing citing one of those numbers resolves here.