NSN 5315-01-141-4074 · NIIN 011414074 · FSC 5315
NO DASHES 5315011414074
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.400 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.103 AND INCHES MAXIMUM 1.113 |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.530 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.400 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.775 AND INCHES MAXIMUM 0.785 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.090 |
| AKTY | SECOND END COUNTERBORE DIAMETER | INCHES NOMINAL 0.650 |
| AKVA | SECOND END COUNTERBORE DEPTH | INCHES NOMINAL 2.120 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.130 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.8730 AND INCHES MAXIMUM 0.8740 |
| CRDY | FIRST END LOCATION | SMALL END |
| CSJF | FIRST END COUNTERSINK ANGLE | DEGREES NOMINAL 90.0 |
| CTBY | FIRST END COUNTERSINK DIAMETER | INCHES MINIMUM 0.396 AND INCHES MAXIMUM 0.406 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 15.0 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 2.030 AND INCHES MAXIMUM 2.040 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MATT | MATERIAL | SHANK PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 011396016. An older drawing citing one of those numbers resolves here.