NSN 5315-01-273-6199 · NIIN 012736199 · FSC 5315
NO DASHES 5315012736199
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.470 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.375 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.160 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.192 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.1851 AND INCHES MAXIMUM 0.1863 |
| CRDY | FIRST END LOCATION | THREADED END |
| CSGL | SECOND END TIP RADIUS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 125.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.565 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-S-763 COND B OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-763 COND B OR MFR REF 3RD MATERIAL RESPONSE --S285,CAGEC 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |