NSN 5990-00-197-0159 · NIIN 001970159 · FSC 5990
NO DASHES 5990001970159
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 82.10 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 7.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 3190.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 279.00 AND MAXIMUM 341.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0300 AND INCHES MAXIMUM 0.0500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.7410 AND INCHES MAXIMUM 1.7610 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.1870 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.960 AND ROTOR TO STATOR MAXIMUM 1.000 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 1.0970 AND INCHES MAXIMUM 1.1030 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 8 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 193.50 AND MAXIMUM 236.50 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 35.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.4120 AND INCHES MAXIMUM 2.4940 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0830 AND INCHES MAXIMUM 0.1030 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0680 AND INCHES MAXIMUM 0.0880 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1220 AND INCHES MAXIMUM 0.1420 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1871 AND INCHES MAXIMUM 0.1873 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5600 AND INCHES MAXIMUM 0.5800 |
| AJSL | BODY SIZE | 15 |