NSN 5305-00-310-6018 · NIIN 003106018 · FSC 5305
NO DASHES 5305003106018
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D);AIRCRAFT, PHANTOM F-4;AIRCRAFT, EAGLE F-15;SUPPORT EQUIPMENT, T-37 AIRCRAFT;SUPPORT EQUIPMENT, T-38 AIRCRAFT;AIRCRAFT, STRATOLIFTER C-135;AIRCRAFT, HORNET F/A-18;AIRCRAFT, HARRIER AV-8B
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.431 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D);AIRCRAFT, PHANTOM F-4;AIRCRAFT, EAGLE F-15;SUPPORT EQUIPMENT, T-37 AIRCRAFT;SUPPORT EQUIPMENT, T-38 AIRCRAFT;AIRCRAFT, STRATOLIFTER C-135;AIRCRAFT, HORNET F/A-18;AIRCRAFT, HARRIER AV-8B |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.829 AND INCHES MAXIMUM 0.859 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.385 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,FSC- 76301 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |