NSN 3020-01-089-7714 · NIIN 010897714 · FSC 3020
NO DASHES 3020010897714
In Stock
GEAR,WORM WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Application: GUN,AUTOMATIC,25 MM.(M242),NSN 1005-01-086-1400
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 48 |
| AGAV | END ITEM IDENTIFICATION | GUN,AUTOMATIC,25 MM.(M242),NSN 1005-01-086-1400 |
| AGJS | PITCH DIAMETER | MILLIMETERS NOMINAL 72.0 |
| AJLA | TEETH QUANTITY | 36 |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.0000 |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPZ | HELIX ANGLE | DEGREES 82.6476 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END MILLIMETERS 3.62 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END MILLIMETERS 33.83 |
| CWRM | FACE NOMINAL WIDTH | MILLIMETERS 20.0 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.043 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END MILLIMETERS 35.0 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END MILLIMETERS 34.98 |
| FEAT | SPECIAL FEATURES | INVOLUTE SPLINE DATA: DIAMETRAL PITCH = 48/96; PRESSURE ANGLE = 30 DEG.; HUBS ARE CSK TO 1 MM. BY 45 DEG.; BORE IS CSK AT BOTH ENDS TO 1 MM. BY 45 DEG. |
| MATT | MATERIAL | OVERALL BRONZE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-728,-ANGANESE BAR,CL B,1 TO 2 HARD,OR CL A,1 TO 2 HARD |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL LUBRICANT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-L-46010,SOLID FIL-,HEAT CURED,CORROSION INHIBITING |
| STYL | STYLE DESIGNATOR |