NSN 5935-00-189-1728 · NIIN 001891728 · FSC 5935
NO DASHES 5935001891728
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END MIL SPEC SINGLE MATERIAL RESPONSE -IL---14,TY SDG-F OR MIL SPEC SINGLE MATERIAL RESPONSE -IL--19833,TY GDI-30F |
| CXCG | INCLUDED CONTACT QUANTITY | 17 |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC DIALLYL PHTHALATE |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC 1ST TREATMENT RESPONSE -IL-G-45204,TY 2,GRADE C,CL 1 AND FED SPEC 2ND TREATMENT RESPONSE QQ-N-290,CL 2 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.399 AND INCHES MAXIMUM 0.440 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.233 AND INCHES MAXIMUM 0.247 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING PIN |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING FED SPEC SINGLE MATERIAL RESPONSE QQ-C-530JBAQQ-C-533 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-B-750 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 1000.0 |
| AFRN | POLARIZATION METHOD | GUIDE PIN/SOCKET |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.071 |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | INCHES NOMINAL 1.000 |
| AFQP | BOARD ACCOMMODATED LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 0.700 |
| AFQV | BOARD ACCOMMODATED WIDTH | INCHES NOMINAL 0.050 |
| AFQW | MATING END QUANTITY | 1 |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.017 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-55302 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-55302 TO 6 |
| AAQL | BODY STYLE | |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND NICKEL |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.140 AND INCHES MAXIMUM 1.160 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
Supersedes
This item replaces cancelled NIIN 004384312. An older drawing citing one of those numbers resolves here.