NSN 5930-00-332-0778 · NIIN 003320778 · FSC 5930
NO DASHES 5930003320778
In Stock
SWITCH,SENSITIVE
Switches
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS8805 |
| AAQL | BODY STYLE | |
| CXQQ | ACTUATOR MOVEMENT | PRETRAVEL INCHES MAXIMUM 0.050 AND OVERTRAVEL INCHES MINIMUM 0.004 AND DIFFERENTIAL INCHES MAXIMUM 0.005 |
| CXQR | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | AMPERES INDUCTIVE DC 7.000 AND AMPERES INDUCTIVE DC 4.000 AND AMPERES LAMP DC 1.000 AND AMPERES MOTOR DC 4.000 AND AMPERES RESISTIVE AC 7.000 AND AMPERES INDUCTIVE AC 4.000 AND AMPERES LAMP AC 1.000 AND AMPERES MOTOR AC 4.000 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CRLD | NONPILE-UP CONTACT ARRANGEMENT | SINGLE SWITCH UNIT POLE, DOUBLE THROW, ONE POSITION MOMENTARY 1 |
| CRRM | SWITCH RELEASE FORCE | OUNCES MINIMUM 4.0 |
| CSJN | SWITCH ACTUATING FORCE | OUNCES MAXIMUM 17.0 |
| AFXE | MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 AND DC 28.0 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| AFUS | ACTUATOR HEIGHT | INCHES MAXIMUM 0.135 |
| AFUU | ACTUATOR FREE POSITION HEIGHT | INCHES MAXIMUM 0.410 |
| AFUR | ACTUATOR DIAMETER | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.065 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.087 AND INCHES MAXIMUM 0.091 |
| AFUQ | ACTUATOR STYLE | |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.326 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.580 AND INCHES MAXIMUM 0.620 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES MINIMUM 0.168 AND INCHES MAXIMUM 0.208 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.626 |
Supersedes
This item replaces cancelled NIIN 002586598. An older drawing citing one of those numbers resolves here.