NSN 6105-01-095-3087 · NIIN 010953087 · FSC 6105
NO DASHES 6105010953087
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 10.620 |
| AAJU | OVERALL LENGTH | INCHES 12.077 |
| AAJV | OVERALL WIDTH | INCHES 9.000 |
| ABRR | KEYWAY WIDTH | SECOND END INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.157 |
| ABRV | KEYWAY DEPTH | SECOND END INCHES MINIMUM 0.174 AND INCHES MAXIMUM 0.178 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES NOMINAL 2.100 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES MINIMUM 0.874 AND INCHES MAXIMUM 0.875 |
| AFYS | KEYWAY LENGTH | SECOND END INCHES MINIMUM 0.835 AND INCHES MAXIMUM 0.905 |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | FLANGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BCNB | SECOND KEYWAY LENGTH | SECOND END INCHES MINIMUM 0.835 AND INCHES MAXIMUM 0.905 |
| BCNC | SECOND KEYWAY WIDTH | SECOND END INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.157 |
| BFLT | TIME INTERVAL | SECONDS MAXIMUM ON 5.0 AND SECONDS MINIMUM OFF 15.0 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | SECOND END INCHES MINIMUM 0.388 AND INCHES MAXIMUM 0.423 |
| BFNC | SECOND KEYWAY CENTER TO SHAFT END DISTANCE | SECOND END INCHES MINIMUM 0.388 AND INCHES MAXIMUM 0.423 |
| BFND | SECOND KEYWAY DEPTH | SECOND END INCHES MINIMUM 0.174 AND INCHES MAXIMUM 0.178 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.905 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 3.000 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 8.125 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 4300.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 2.625 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 27.5 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END SINGLE STYLE A1 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A27 |
| CWJG | ANGLE BETWEEN EXTERNAL KEYS | SECOND END DEGREES 180.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | CONNECTOR, PLUG 1 |