NSN 5935-00-211-1510 · NIIN 002111510 · FSC 5935
NO DASHES 5935002111510
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TY 2,CL 1 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.500 |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACE AND SILVER BODY SURFACE |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.005 AND SILVER GRAINS, TROY 0.100 |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.796 AND INCHES MAXIMUM 0.843 |
| AFQQ | MOUNTING FACILITY THICKNESS | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.240 |
| AFQR | THREADED DEVICE TYPE | MOUNTING BUSHING |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AFRF | CONTACT MAXIMUM FREQUENCY RATING | SINGLE MATING END SINGLE CONTACT GROUPING MEGAHERTZ 400.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CSPT | SHELL MATERIAL | COPPER ALLOY |
| CSWM | SHELL SURFACE TREATMENT | SILVER AND COPPER ALLOY |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC 1ST TREATMENT RESPONSE QQ-S-365 |
| CXCG | INCLUDED CONTACT QUANTITY | 1 |
| CXCJ | BUSHING ACCOMMODATION HOLE SHAPE | ROUND W/FLAT |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING COAXIAL SOCKET |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.060 AND INCHES MAXIMUM 1.120 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 0.800 |
Supersedes
This item replaces cancelled NIINs 010296431 · 010677713 · 011470750. An older drawing citing one of those numbers resolves here.