NSN 5990-00-813-8808 · NIIN 008138808 · FSC 5990
NO DASHES 5990008138808
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 77.30 AND MAXIMUM 83.50 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 585.00 AND MAXIMUM 700.00 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 18.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 200.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7320 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 32.00 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.0000 |
| CQTM | TERMINAL LOCATION | REAR |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 4350.00 AND MAXIMUM 5700.00 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1870 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3560 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.735 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 22.00 AND MAXIMUM 32.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES NOMINAL 0.070 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| AAQL | BODY STYLE | |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |