NSN 3020-00-517-1793 · NIIN 005171793 · FSC 3020
NO DASHES 3020005171793
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 1.000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.2500 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.3750 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 9.5750 |
| CWNH | TOOTH FORM | STUB |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 9.3750 |
| AJLA | TEETH QUANTITY | 75 |
| ANTP | BORE STYLE | |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.8750 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 1.8750 |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL---16576 |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.1250 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.2500 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.1250 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 2.1250 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.1250 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.7812 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 2.1250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.2500 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.3120 |