NSN 5990-00-781-6761 · NIIN 007816761 · FSC 5990
NO DASHES 5990007816761
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0500 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 11.20 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 18.70 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1870 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 102.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6250 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 19.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 4.50 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 21.70 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 265.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 1.2 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
Supersedes
This item replaces cancelled NIIN 009127377. An older drawing citing one of those numbers resolves here.