NSN 6105-00-914-1585 · NIIN 009141585 · FSC 6105
NO DASHES 6105009141585
In Stock
MOTOR,CONTROL
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJV | OVERALL WIDTH | INCHES 0.750 |
| BFML | CONTROL FIELD WINDING TYPE | SINGLE WINDING |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 0.04 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.108 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| FAAZ | PHASE | INPUT TWO |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 13.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.297 |
| CWDY | TEMP RATING | AMBIENT CELSIUS -55.0 AND AMBIENT CELSIUS 100.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 0.625 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 7000.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 55.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 26.0 |
| AAJU | OVERALL LENGTH | INCHES 1.172 |
| ACDC | CURRENT TYPE | INPUT AC |
| AAJT | OVERALL HEIGHT | INCHES 0.750 |
| ABSA | SPLINE QUANTITY | 13 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.125 |
| ANPZ | ENCLOSURE FEATURE | HERMETIC |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.194 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) AND FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 AND THREADED HOLE(S) 3 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Supersedes
This item replaces cancelled NIIN 004951185. An older drawing citing one of those numbers resolves here.