NSN 3040-00-507-3231 · NIIN 005073231 · FSC 3040
NO DASHES 3040005073231
In Stock
SHAFT,STRAIGHT
Miscellaneous Power Transmission Equipment
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.8715 AND INCHES MAXIMUM 0.8720 |
| AAHP | SECOND END STYLE | |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.198 |
| AMHD | SECOND END HOLE DEPTH | INCHES MINIMUM 0.061 AND INCHES MAXIMUM 0.080 |
| CSYM | SURFACE FINISH | MICROINCHES 63.0 |
| AAHW | SECOND END GROOVE WIDTH | INCHES MINIMUM 0.0460 AND INCHES MAXIMUM 0.0490 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES MINIMUM 0.8320 AND INCHES MAXIMUM 0.8380 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.430 AND INCHES MAXIMUM 2.450 |
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| FEAT | SPECIAL FEATURES | FIRST END THREE ADDITIONAL UNTHD CROSS DRILLED HOLES 90 DEG ANGLES BTWN HOLES; FIRST END INTERNAL BORE 0.625 IN. NOM DIA,2.065 IN. NOM DP;SECOND END SIX INTERNAL SPLINES 0.566 IN. DIA,0.375 IN. NOM SPLINE LG |
| MATT | MATERIAL | STEEL COMP 1045 OR STEEL COMP 1145 |
| AMDX | FIRST END HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.1420 AND INCHES MAXIMUM 0.1440 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.1590 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.8715 AND INCHES MAXIMUM 0.8720 |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 0.815 |
| AMEB | FIRST END HOLE DEPTH | INCHES MINIMUM 0.237 AND INCHES MAXIMUM 0.256 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES MINIMUM 0.042 AND INCHES MAXIMUM 0.052 |