NSN 4720-00-444-6376 · NIIN 004446376 · FSC 4720
NO DASHES 4720004446376
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 26.700 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.188 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.312 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NIPPLE STEEL CORROSION RESISTING |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NUT STEEL CORROSION RESISTING |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE PASSIVATE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NUT PASSIVATE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |