NSN 5305-01-462-2753 · NIIN 014622753 · FSC 5305
NO DASHES 5305014622753
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F18 E/F
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.830 AND INCHES MAXIMUM 0.860 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.2931 AND INCHES MAXIMUM 0.3016 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.1105 AND INCHES MAXIMUM 0.1125 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.1540 AND INCHES MAXIMUM 0.1560 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 2200 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG REDUCED HEAD, GEAR DRIVE RECESS |
| FEAT | SPECIAL FEATURES | CHAMFERED END - CHAMFER PLUS INCOMPLETE THREADS NOT TO EXCEED 2 THREAD PITCHES |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629, H13-8-O |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |