NSN 3020-01-617-2219 · NIIN 016172219 · FSC 3020
NO DASHES 3020016172219
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Application: F404 ENGINE GEARBOX ACCESSORY
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6265 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPUR GEAR |
| FEAT | SPECIAL FEATURES | REFER TO DRAWING FOR ADDITIONAL DETAILS |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGAV | END ITEM IDENTIFICATION | F404 ENGINE GEARBOX ACCESSORY |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.2500 |
| AJLA | TEETH QUANTITY | 51 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 42.0 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH BODY FIRST END PLAIN 5 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.4150 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.0450 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.8910 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.3450 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.8750 |
| CWTB | COUNTERBORE NOMINAL DEPTH | BOTH ENDS INCHES 1.0000 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.5000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.5000 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH FACE INCHES 0.3750 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH BODY FIRST END INCHES 2.3600 |
| STYL | STYLE DESIGNATOR |