NSN 5305-00-958-5450 · NIIN 009585450 · FSC 5305
NO DASHES 5305009585450
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 3 OR MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-81562,TYE 2 CLASS 3 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 2C |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.750 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 OR ASSN STD SINGLE MATERIAL RESPONSE AST-A108 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.574 AND INCHES MAXIMUM 0.667 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.279 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
Supersedes
This item replaces cancelled NIINs 000133442 · 000594555 · 002987623. An older drawing citing one of those numbers resolves here.