NSN 5306-00-282-2682 · NIIN 002822682 · FSC 5306
NO DASHES 5306002822682
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.031 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-18732 |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.874 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.440 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 431 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.469 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2487 AND INCHES MAXIMUM 0.2492 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.172 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.076 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.562 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASK | HEAD STYLE |