NSN 5305-01-158-2041 · NIIN 011582041 · FSC 5305
NO DASHES 5305011582041
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Application: RG-33 AUV MRAP; RG-31 MRAP; MRAP BUFFALO MK2A2; MEDIUM MINE PROTECTED VEHICLE - MMPV
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | MILLIMETERS MINIMUM 17.5 AND MILLIMETERS MAXIMUM 20.0 |
| AASB | FASTENER LENGTH | MILLIMETERS NOMINAL 20.00 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | MILLIMETERS NOMINAL 5.0 |
| AATB | WIDTH BETWEEN FLATS | MILLIMETERS NOMINAL 13.0 |
| AGAV | END ITEM IDENTIFICATION | RG-33 AUV MRAP; RG-31 MRAP; MRAP BUFFALO MK2A2; MEDIUM MINE PROTECTED VEHICLE - MMPV |
| AHYM | NOMINAL THREAD DIAMETER | MILLIMETERS 8.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 113784 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 18.0 AND ROCKWELL C MAXIMUM 31.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 91000 |
| CQQR | THREAD PITCH IN MILLIMETERS | 1.25 |
| MATT | MATERIAL | OVERALL STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| THSD | THREAD SERIES DESIGNATOR | M |
Supersedes
This item replaces cancelled NIINs 011555442 · 012956194. An older drawing citing one of those numbers resolves here.