NSN 5306-01-645-5396 · NIIN 016455396 · FSC 5306
NO DASHES 5306016455396
In Stock
BOLT,SHOULDER
Bolts
Application: F-18 A-D AIRCRAFT
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.285 AND INCHES MAXIMUM 1.325 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,SHOULDER - HEX HEAD,CLOSE TOLERANCE,CORROSION RESISTANT STEEL,UP TO 1200 DEGREES F |
| FEAT | SPECIAL FEATURES | DRY FILM LUBED SHANK PER MCAIR PSI8021 CLASS 15 DESIGNATED BY LETTER M IN PART NUMBER |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 1.053 AND INCHES MAXIMUM 1.073 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.400 AND INCHES MAXIMUM 0.450 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.473 AND INCHES MAXIMUM 1.503 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.171 |
| AGAV | END ITEM IDENTIFICATION | F-18 A-D AIRCRAFT |
| AAJD | THREAD CLASS | 3A |
| SUPP | SUPPLEMENTARY FEATURES | NHA: 74A425000 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5732 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |