NSN 5306-00-282-0915 · NIIN 002820915 · FSC 5306
NO DASHES 5306002820915
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.377 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.891 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 431 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-18732 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.406 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.031 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1889 AND INCHES MAXIMUM 0.1894 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.070 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE |
Supersedes
This item replaces cancelled NIIN 005319664. An older drawing citing one of those numbers resolves here.