NSN 5120-01-363-9304 · NIIN 013639304 · FSC 5120
NO DASHES 5120013639304
In Stock
SPANNER ATTACHMENT,SOCKET WRENCH
Hand Tools, Nonedged, Nonpowered
Application: AIM-120A
Technical characteristics
7 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | AIM-120A |
| ATNC | DRIVE SURFACE SIZE | SINGLE END INCHES NOMINAL 0.250 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 50.0 |
| FTLD | FUNCTIONAL DESCRIPTION | THE WRENCH IS FABRICATED FROM A 2.0 INCH LENGTH OF 0.5 INCH DIA STEEL STOCK; THE TOOL IS INITIALLY FORMED BY TAKING A CENTERED FLAT CUT 0.422 DEEP BY 1.5 INCH LONG MEASURED FROM LENGTH WISE CENTER OF STOCK; THIS LEAVES AN UPRIGHT MEASURING OF 0.25 WIDE BY 0.422INCH HIGH AT EACH END |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL |
| SUPP | SUPPLEMENTARY FEATURES | THE WRENCH POINT OF TOOL IS FORMED BY REMOVING 0.13 INCH FROM TOP OF ONE UPRIGHT; MATERIAL IS REMOVED FROM UPRIGHT FOR WRENCH POINT BY MAKING A HEXCUT MEASURING 0.139 P/M 0.003 INCH; HEX WRENCH POINT CENTERLINE TO BE ON ORIGINAL CENTERLINE OF STOCK; A 1/4 INCH POWER DRIVER 0.75 INCH LONG IS WELDED TO REMAINING UPRIGHT; CENTERLINE OF HEX DRIVER TO BE ON CENTERLINE OF WRENCHPOINT; OVERALL LENGTH OF TOOL TO BE 2.75 INCHES |