NSN 5315-00-735-7787 · NIIN 007357787 · FSC 5315
NO DASHES 5315007357787
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416 TYE 2 CLASS 3 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND PHOSPHATE AND ZINC AND CHROMATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL MATERIAL RESPONSES QQ-W-4-5 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1024 OR STEEL COMP 1025 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.058 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.016 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.344 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.151 AND INCHES MAXIMUM 0.154 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 0.375 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.108 AND INCHES MAXIMUM 0.113 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| AAGZ | FIRST END STYLE | |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |