NSN 5365-00-740-9618 · NIIN 007409618 · FSC 5365
NO DASHES 5365007409618
In Stock
BUSHING,NONMETALLIC
Bushings, Rings, Shims, and Spacers
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BWRR | LONGER TAPER SMALLEST DIAMETER | INCHES NOMINAL 1.500 |
| BWRQ | TAPERED BODY SMALLEST DIAMETER | INCHES NOMINAL 1.625 |
| ADYT | CENTER HOLE DIAMETER | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.010 |
| APGF | DESIGN TYPE | SINGLE CENTRALLY LOCATED HOLE |
| BWRP | TAPERED BODY LARGEST DIAMETER | INCHES MINIMUM 1.870 AND INCHES MAXIMUM 1.880 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.991 AND INCHES MAXIMUM 0.997 |
| MATT | MATERIAL | RUBBER SYNTHETIC |
| STYL | STYLE DESIGNATOR | |
| BWSK | TAPERED PORTION HEIGHT | INCHES NOMINAL 0.313 |
| BWSL | BOTTOM TAPERED PORTION HEIGHT | INCHES MINIMUM 0.6785 AND INCHES MAXIMUM 0.6845 |
| AASF | NONMETALLIC HARDNESS RATING | MINIMUM DUROMETER 55.0 AND MAXIMUM DUROMETER 65.0 |
Supersedes
This item replaces cancelled NIIN 000815100. An older drawing citing one of those numbers resolves here.